How to Choose Circulating Water Pumps for Water Supply Plants
Release time:
2025-09-29
Author:
Source:
How to Choose Circulating Water Pumps for Water Supply Plants
In the operation system of a water supply plant, circulating water pumps do not directly undertake the task of “lifting water,” but they are key equipment to ensure the stability of the water treatment process, the balance of pipeline network pressure, and the circulation and purification of water quality. Scientifically and reasonably selecting circulating water pumps can not only improve the stability of the water supply system, but also significantly reduce energy consumption and operation and maintenance costs. So how to choose circulating water pumps for water supply plants? M&W Pump Industry editor will provide you with a comprehensive analysis from selection principles, parameter calculation, pump type recommendation to practical application, helping you build a high-efficiency, energy-saving and reliable water supply system.
Clarify the Role of Circulating Water Pumps in Water Supply Plants
In the water treatment system of water supply plants, circulating water pumps are mainly used for:
Hydraulic circulation of reaction tanks and sedimentation tanks to enhance the mixing effect of chemicals;
Water circulation supply for filter backwashing systems;
Pressure balance and circulation adjustment between clear water tanks and the pipe network;
Water circulation transportation in advanced treatment processes (such as ozone and activated carbon).
Unlike ordinary booster pumps, the core task of circulating pumps is to “keep the water continuously flowing in the closed-loop system,” overcoming the resistance loss caused by pipelines, valves, equipment, etc. Therefore, the pump selection logic pays more attention to system matching and operation stability.
According to Industry Standards and Engineering Practice, Selection Should Follow the Following Key Principles:
1. Flow and head should match system requirements
The total flow ≥ pipe network design flow. If the system has a bypass pipe, the bypass flow should be included.
The head should meet the resistance loss of the most unfavorable loop of the system, including:
Pipeline friction loss
Local resistance (elbows, valves, filters, etc.)
Equipment pressure drop (such as filters, heat exchangers)
It is recommended to calculate accurately through hydraulic calculation software or formulas to avoid “big horse pulling a small cart” which causes energy waste
2. The pump characteristic curve should be flat, single-stage centrifugal pump preferred
The working point of the circulating pump should be in the high efficiency area, and when the system operating conditions fluctuate, the head change should be small.
The characteristic curve of single-stage centrifugal pump is relatively flat, which is suitable for the micro-adjustment requirements of flow in the circulation system, and is recommended as the first choice.
3. Pressure and temperature resistance should match system parameters
Water supply systems usually operate at normal temperature (5~30℃), but attention should be paid to winter freezing and summer high temperature effects.
The pressure resistance of the water pump should be higher than the maximum working pressure of the system. It is recommended to use IP55 and above protection grade, stainless steel or wear-resistant cast iron material, to cope with long-term operation and water quality corrosion.
4. Reasonable number of units, ensuring redundancy and flexible adjustment
The number of circulating pumps shall not be less than two, one of which is standby, to ensure continuous operation of the system.
When variable frequency speed control is adopted, “one in use, one standby + speed regulation adjustment” can be realized, with significant energy-saving effect.
When multiple pumps run in parallel, a comprehensive hydraulic characteristic curve of the pump and pipe network should be drawn to avoid “water grabbing” or efficiency reduction.
5. Priority should be given to variable frequency pumps to achieve energy-saving operation
The water consumption of water supply plants varies in day and night and with the seasons. Variable frequency circulating pumps can dynamically adjust flow and pressure according to actual demand, and the energy saving rate can reach more than 30%.
Especially suitable for systems using “staged variable flow regulation.” It is advisable to configure pump groups with different flow and head combinations to improve overall operating efficiency.
6. Consider special working conditions for more targeted selection
Northern regions: choose models that have passed -40℃ low-temperature test to ensure stable winter operation.
Coastal or highly corrosive environments: give priority to 316L stainless steel pumps to enhance corrosion resistance.
Pump houses with limited space: vertical inline pumps or integrated intelligent pump sets can be considered to save installation space.
Recommended Reading